Home > Dual Boot > Dual Boot Windows 7 And Xp Windows 7 Installed First

Dual Boot Windows 7 And Xp Windows 7 Installed First


Flag Permalink This was helpful (0) Collapse - dual boot by Eugene I / October 23, 2009 5:38 PM PDT In reply to: Have both connected in the future... Sometimes they must be presented during installation and other times not, depending on the motherboard. Would I be able to use this technique to switch defaults? If you want to set up one or the other as the default OS, go into Advanced System Settings as explained in The Geek’s Article. Source

I cant remember the exact file at the moment. I have found all kinds of neat ways to customize my new laptop with Vista on it. I have a Gigabyte board and so when do you hit the F12 key? RSS ALL ARTICLES FEATURES ONLY TRIVIA Search How-To Geek Easily Set Default OS in a Windows 7 / Vista and XP Dual-boot Setup If you are running a dual-boot setup http://www.sevenforums.com/installation-setup/61893-dual-boot-hdd-1-vista-ultimate-hdd-2-win-7-pro.html

Dual Boot Windows 7 And Xp Windows 7 Installed First

The Story, boot loader is messed up and says there are missing files and I can’t boot xp or vista… so I had to run my XP disk and recover the Related Resources solved Dual Boot XP and Windows 7 (each) on TWO Individual Hard Drives Dual Boot XP and Windows 7 (each) on TWO Individual Hard Drives Dual Boot XP and Tom's Hardware Around the World Tom's Hardware Around the World Denmark Norway Finland Russia France Turkey Germany UK Italy USA Subscribe to Tom's Hardware Search the site Ok About Tom's Hardware Any help appreciated.

Copyright © 2006-2017 How-To Geek, LLC All Rights Reserved

Get exclusive articles before everybody else. is this is correct.....??? To make a dual boot system on two disks simply install Windows XP first and then Windows 7. Dual Boot With 2 Hard Drives With Windows 7 when you go into the same area it does not give you any boot.ini to edit to change.

i do not have a vista cd. Dual Boot Windows 7 And Xp Two Hard Drives Any ideas how else to get to the System Startup an Recovery? I am not sure this will help you john but let me tell you about my Dell two HD dual boot config XP first then added Vista. http://www.theeldergeek.com/windows_8/install_dual_boot_w7_and_w8_rtm_in_vhd.htm Thanks in advance for your time and help.

Enter a size above 16GB for the 32-bit version of Windows 8.1 and over 20GB for the 64-bit flavor, and then hit the Shrink button. Windows 10 Dual Boot Xp If you had changed the bios to AHCI or RAID, then the XP install would have failed without using the F6 additional drivers step. But if I choose Win vista I will get an error message. I have installed Vista and XP to separate drives.

Dual Boot Windows 7 And Xp Two Hard Drives

September 18, 2011 Jon Thanks! *Performs the "You're my hero" dance* September 19, 2011 Souvik Thanks… Bro. But you're also a bit scared at the same time, since you've heard that it's such a big adjustment from good old Windows 7. Dual Boot Windows 7 And Xp Windows 7 Installed First When finished, install Win7 on the other drive. How To Dual Boot Windows Xp And Windows 7 (xp Installed First) Fig. 16 Product Key - Enter the Product Key to be used to activate Windows 8.

I have two sata HDD's that attach with an IDE connecter and no way in the BIOS to change anything about the HDD's. this contact form I want to know coz I want to try Windows 7 Ultimate. June 14, 2010 ALAN I have read all the posts, but don't seem to see an answer to the most common problem which I am also facing now; I have a A valid product key is required. Dual Boot Windows 7 And 10 Separate Hard Drives

It starts with Windows XP everytime. July 5, 2009 prashant I’ve installed Windows Vista and now before a week I’ve installed windows XP. I can not use the Windows Vista installed on the other drive. http://harryhooie.com/dual-boot/dual-boot-xp-and-windows-7-boot-ini.html You can follow him on Google+ if you'd like.

This tip just made my life sooooo much more pleasant :) May 14, 2008 amex Hello! Dual Boot Software After extending the hard drive I restart and install Vista, but after the install restarts once I come to the screen where you choose which version of Windows to boot and If anyone has experienced this and has a solution be advise me as to what I am doing wrong or not doing right.

It will not boot into normal mode.

so i will let you know how it turned out. may be in some time i can give you more details.take care Flag Permalink This was helpful (0) Collapse - Thanks by vango4life / February 7, 2010 8:35 PM PST In Get XP to run. Easybcd Download I even bcdedited to 10 secs before Win loads to default 7, and renamed "Earlier version" to "Win XP".

Like if your computer was pre-installed with Vista, and you want to dual boot with Windows 7 January 12, 2010 Peter @Marco - Yes. how to change default boot settings to previous windows 7. Whew.(Warning: tirade follows) Once it does work, it's very exciting to be able to choose which OS I want at boot up. Check This Out Windows 8 Index >>> A | B | C | D | E | F | G | H | I | J | K | L | M | N

Startup Repair will then restore the new windows boot loader and make both Vista and XP bootable. You’ll also want to plan for how much space you want on the Windows 7 partition as well. It starts with Windows XP everytime. One thing you might want to change though, is the Volume label.

I would like to have the option of booting from either disc. Please try the request again. by mach2race / May 29, 2008 4:43 AM PDT In reply to: Have both connected in the future... July 11, 2010 avi hi i have dual xp and vista installed mistakenly i set the timeout for os choice menu to 0 sec in vista can u help how to

So afterward just install vista on the next drive. I have tried it 6 times now and I get the same message. Since the XP drive wasn't connected at the time of Vista's reinstallation it doesn't know about XP, so there's no dual-boot option. Thank you May 8, 2007 Sivanandh Talari Hi, I am writing in with this wierd or rather crazy issue that I am facing.

Any help would be appreciated. March 8, 2008 Gerry I have the same problem as Drexziel up there. thanks Flag Permalink This was helpful (0) Collapse - Check by dhrwfan / March 7, 2008 7:54 AM PST In reply to: Windows Vista failing to start at dual boot Check A list of drives will be displayed.

The Windows 7 disk is label as (C:), The new Vista Volume as (D:), and the DVD drive as (E:). Then I unplugged the IDE and installed the Sata or Vista.