Home > Bsod > BSOD - Various Random 0x000000 Codes

BSOD - Various Random 0x000000 Codes

Today I removed the OCZ stick and I have had a few BSOD (I have attached the mini dumps). You might want to unplug the rest and see if it helps. So then I took all four out again and put in the same single 1GB stick, BSOD! As for your errors here is what is reported: Two are 0xD1 and these are usually caused by faulty drivers but they can also be caused by faulty or mismatched memory. navigate here

Try removing all IDE devices except for hard disks. WinDbg Output Example: INVALID_AFFINITY_SET (3) Arguments: Arg1: 0000000000000000 Arg2: 0000000000000000 Arg3: 0000000000000000 Arg4: 0000000000000000 STOP0x00000004: INVALID_DATA_ACCESS_TRAP (go to top of page) Usual causes: MSDN Listing (Win2K ResKit): http://msdn.microsoft.com/en-us/library/ms818763.aspx MSDN Login now. WinDbg Output Example: IRQL_NOT_GREATER_OR_EQUAL (9) Arguments: Arg1: 0000000000000000 Arg2: 0000000000000000 Arg3: 0000000000000000 Arg4: 0000000000000000 STOP0x0000000A: IRQL_NOT_LESS_OR_EQUAL (go to top of page) Usual causes: Kernel mode driver, System Service, BIOS, Windows, Virus http://www.sevenforums.com/bsod-help-support/327876-bsod-various-random-0x000000-codes-even-when-idle.html

here are my error codes and I do have a Belarc advisor report if someone would like me to email it to them: Code: Dump File : 021011-48734-01.dmp Crash Time : This is done because the potential exists for damage to your system - and Windows is designed to "fail fast" in order to protect your hardware. If all fails I would consider reinstalling the operating system from OS installation software, or restore to factory settings, If you can take you computer as much as you can and I been doing some research on my errors as well and its been suggested that I need to alter my CPU and memory voltage on my motherboard in the BIOS.

This means one bad driver can corrupt a different drivers data on each boot of the system. My System Specs Computer type PC/Desktop System Manufacturer/Model Number UNDER CONSTRUCTION - ALWAYS OS Windows 7 Enterprise X64/Windows 10 Enterprise X64/Windows 10 Pro X64/Linux Mint CPU i7-5930K Motherboard Asus X99 Deluxe Click on the Spoiler (Show/Hide) tag below to show it. WERCON - START | type view | "View all Problem Reports" | 2x-click on line item for additional crash info 2.

If the calls are made on more than one processor, then one processor will be blocked until the other processor releases the lock. Regards. . . I have updated all drivers with the exception of the Broadcom 802.11 USB Network Adapter Driver as I simply could not find a suitable update or that I was actually using If you still get blue screens in safe mode then it is definitely a hardware issue.

Provide full system info - Blue Screen of Death (BSOD) Posting Instructions Regards. . . Possible Malware/Adware High Performance Workstation PC System OS upgrades portable hdd show 2Tb real... Sitting idle / low usage they are both usually below 40 degrees C, which they returned back to after 5 minutes or so when stopping. Added Show/Hide tags to reduce the size of the beginning of the page.

Reliability Monitor - START | type perfmon /rel 3. http://newwikipost.org/topic/eWe4g05Bgo3jL6RzL6rNRE41Dql1mS0k/Random-codes-BSOD-while-gaming-sufring-or-using-Teamspeak.html All Rights Reserved Tom's Hardware Guide ™ Ad choices Articles & News Forum Graphics & Displays CPU Components Motherboards Games Storage Overclocking Tutorials All categories Chart For IT Pros Get They seem to all be around USB related problems bug e.g. 0x0FE, Bugcode_usb_driver and when restarting the first restart has unresponsive keyboard and mouse (which are plugged into USB). Still, we can try some other things.

The sheer number of new BSOD KB articles is too daunting to keep up with.. check over here WinDbg Output Example: INVALID_SOFTWARE_INTERRUPT (7) Arguments: Arg1: 0000000000000000 Arg2: 0000000000000000 Arg3: 0000000000000000 Arg4: 0000000000000000 STOP0x00000008: IRQL_NOT_DISPATCH_LEVEL (go to top of page) Usual causes: MSDN Listing (Win2K ResKit): http://msdn.microsoft.com/en-us/library/ms818780.aspx MSDN This bug check appears very infrequently. Contact the software manufacturers to obtain updates of these third-party tools.

Let's not look for zebras if we don't have to. if they are pull one and run memtest86 on the laptop and run the laptop. If you encounter bug check 0xA while upgrading to a later version of Windows, this error might be caused by a device driver, a system service, a virus scanner, or a http://harryhooie.com/bsod/bsod-every-30-min.html Sometimes at startup ( in normal mode, not in safe mode ), every time at Windows Update and even when system is idle ( in normal and safe mode ).

This bug check appears very infrequently. And to be sure it wasnt the slot I ran them both in the same spot. While tirelessly troubleshooting this problem I have already replaced the psu and the motherboard.

Then we tried another brand new stick, still the same.

BSOD Help and Support Our Sites Site Links About Us Find Us Vista Forums Eight Forums Ten Forums Help Me Bake Network Status Contact Us Legal Privacy and cookies Windows 7 By continuing to browse our site you agree to our use of data and cookies.Tell me more | Cookie Preferences Partially Powered By Products Found At Lampwrights.com After re-boot now i cannot even tell if it is running because all the settings are back at default. 02-15-2011, 08:07 PM #7 jcgriff2 Team Manager, Microsoft SupportBSOD Kernel Edited by Allan, 24 March 2011 - 11:45 AM.

This indicates that a request for a spin lock has been initiated when the spin lock was already owned. Thanks in advance! If you're getting a blue screen in a Bart's then it's a hardware issue. http://harryhooie.com/bsod/bsod-dxgmms1-sys.html take the battery and power off the unit flip it over and check that both ram sticks are locked in.

I am going to remove AVG and try another free AVG to see if that helps. i type it in and get it running check or uncheck everything it says to click finish then reboot then i just log on normally and it's as if nothing happened More often memory corruption happens because of software errors in buggy drivers, not because of faulty RAM modules. Prime 95 will cause your CPU temps to climb rapidly.

WinDbg Output Example: IRQL_NOT_DISPATCH_LEVEL (8) Arguments: Arg1: 0000000000000000 Arg2: 0000000000000000 Arg3: 0000000000000000 Arg4: 0000000000000000 STOP0x00000009: IRQL_NOT_GREATER_OR_EQUAL (go to top of page) Usual causes: MSDN Listing (Win2K ResKit): http://msdn.microsoft.com/en-us/library/ms818783.aspx MSDN My System Specs Computer type PC/Desktop System Manufacturer/Model Number MESH OS Windows 7 Home Premium 64bit CPU AMD Phenom (tm) II X4 955 Processor 3.2Ghz Motherboard unknown Memory 4GB unknown Graphics If so, boot to safe mode. WinDbg Output Example: APC_INDEX_MISMATCH (1) This is a kernel internal error.

Other than that, the user doesn't recall adding any software and definitely not hardware. WinDbg Output Example: DEVICE_QUEUE_NOT_BUSY (2) Arguments: Arg1: 0000000000000000 Arg2: 0000000000000000 Arg3: 0000000000000000 Arg4: 0000000000000000 STOP0x00000003: INVALID_AFFINITY_SET (go to top of page) Usual causes: MSDN Listing (Win2K ResKit): http://msdn.microsoft.com/en-us/library/ms818756.aspx MSDN BSOD Help and Support Random BSOD's random error codesRecently had my computer open and lying on it's side for around 5 days, put the cover back on and booted it up Back to top #5 ijabit ijabit Topic Starter Members 5 posts OFFLINE Local time:09:37 PM Posted 24 March 2011 - 11:35 AM OS?Also, What is new or different since the

The system will use this buffer to keep track of wait objects. But if it's a laptop I don't know how that would work, there are some Administrator Tools to check integrity of your system, Memory and Hardware. here is system configuration and the crash dump analysis by whocrashed toolwindows version: Windows 7 Service Pack 1, 6.1, build: 7601windows dir: C:\WindowsHardware: Inspiron 1525 , Dell Inc., 0U990CCPU: GenuineIntel Intel(R) This bug check appears very infrequently.

and that's if I'm lucky. Possibly this problem is caused by another driver that cannot be identified at this time. Random BSOD's Started by ijabit , Mar 24 2011 11:03 AM Please log in to reply 9 replies to this topic #1 ijabit ijabit Members 5 posts OFFLINE Local time:09:37 A negative value indicates that a driver has disabled APC calls without re-enabling them.

Snackzilla BSOD, App Crashes And Hangs 6 02-04-2011 09:48 AM Windows 7 BSOD My computer which I recently built, has been BSODing off and on for the past week. This is not a very high power draw, and the same PSU works with a video card (8500gt), multiple hard drives, cd drive, and ethernet card plugged in (and has for